The only official main station of Woson reducer

Hot search:irrigation Gearbox Cycloid reducer Swl screw jack
  • Product description
  • Technical parameter
product description: 1 Purpose The conical cylindrical gear reducer (hereinafter referred to as the reducer) is used for transmission devices in which the input shaft and the output shaft are arranged in a vertical direction. Mainly used in belt conveyors and various transportation machinery, but also in the transmission mechanism of various general machinery such as coal, metallurgy, mining, chemical industry, building materials, light industry, petroleum and so on. 2 Performance characteristics High carrying capacity, low noise, small size, light weight, high efficiency and long service life. 3 Parameter range DBY, DBYK, and DBZ reducers each have 12 specifications, and the nominal center distance is: 160, 180, 200, 224, 250, 280, 315, 355, 400, 450, 500, 560mm. Each specification has 5 transmissions. Compared with (8, 10, 11.2, 12.5, 14), there are two kinds of rotation and four types of assembly, respectively constituting 240 kinds of reducers. DCY, DCYK, and DCZ type reducers each have 15 specifications, the nominal center distance is: 160, 180, 200, 224, 250, 280, 315, 355, 400, 450, 500, 560, 630, 710, 800mm; Each specification has 11 transmission ratios (16, 18, 20, 22.4, 25, 28, 31.5, 35.5, 40, 45, 50), two rotation directions, four assembly types, and 660 types of reducers. This series of reducers can meet the full power requirements of TD and DX belt conveyors and other transportation machinery in the working range of 0.8-6.5m/s belt speed. 4 Structure The first-stage transmission of the reducer is Gleason-made spiral bevel gears, and the second and third transmissions are involute cylindrical helical gears. Lubrication of reducer: Under normal circumstances, gears and bearings of reducer are lubricated by splashing oil pool and cooled naturally. Only when the working equilibrium temperature of the reducer exceeds the specified value, or the carrying power exceeds the thermal power PG1, the oil pool with cooling pipe is used for lubrication. 5 Model and marking The model of the reducer is composed of the type code, the nominal center distance a (the center distance of the final stage), the nominal transmission ratio, the assembly type code, and the input shaft rotation direction code. D-belt conveyor type group code, B-two-stage transmission, C-three-stage transmission, Y-hardened gear, Z-medium hardened gear, K-output shaft is in the form of a hollow shaft. Nominal center distance: expressed by actual numbers, the unit is mm Transmission ratio: expressed by the nominal transmission ratio. Assembly type: indicated by Roman numerals I, II, III, IV. The direction of rotation of the input shaft: When looking at the direction of the input shaft, S is clockwise and N is counterclockwise.





null
UMC / DURST special wheel reducer for the same type of sprinkler irrigation equipment motor one minus two minus Woson reducer
UMC / DURST special wheel reducer for the same type of sprinkler irrigation equipment motor one minus two minus Woson reducer>

UMC / DURST / the same type of sprinkler irrigation equipment special wheel reducer motor one minus

Center drive + wheel reducer = special reducer for sprinkler irrigation
Center drive + wheel reducer = special reducer for sprinkler irrigation>

UMC / DURST / the same type of sprinkler irrigation equipment special wheel reducer motor one minus

VM screw conveyor special reducer (new product)
VM screw conveyor special reducer (new product)>

WSJ series gear reducer is a special reducer produced for mixer conveyors, which can be widely used

Screw jacks all categories
Screw jacks all categories>

Screw jacks all categories

All viewed products

Woson reducer copyright©2012-2030 WOSEN REDUCER ALL Rights Reserved.